Arneg Colonia 3 G2 Mode D'emploi page 36

Colonia 3 - Mini Colonia
English
10. Transportation
WARNING! Heavy object in motion. Flattening
Ensure there are no unauthorised persons in the handling area.
The loading-unloading operations must be performed by qualified personnel that are
able to verify weights, the exact points for lifting (without piping, cables, electrical
panels, etc.) and the most suitable means, both in terms of safety and lifting capacity.
The cabinets are supplied with a wooden platform frame attached to the base for
transportation with forklift truck.
Characteristics Use a forklift truck:
of the forklift - with suitable characteristics in compliance with the relevant standards
truck - that is NOT second-hand/damaged
- manually or electric suitable for lifting of the cabinet with nominal lifting
capacity greater than or equal to 1000 kg
- with suitable ropes and cables that are NOT worn
Safe
movement
(procedure)
i
DO NOT use transportation procedures other than those indicated
11. Storage
procedure
Avoid
12. Receipt, unpacking, initial cleaning
Before carrying out any operation take all possible precautions to prevent injury to the
operator, usethe individual Personal Protection Equipment provided(cap.3.)
DO NOT use alcohol to clean the methacrylate (Plexiglas) parts
DO NOT use abrasives or metal sponges
The cabinet can be supplied packaged as follows:
with wooden frame attached to the base and nylon casing secured with straps (standard)
(Fig. 5)
cardboard packaging (upon request) (Fig. 6)
with wooden crate (upon request) (Fig. 7)
12.1. Upon receipt of the cabinet
36
ensure there are no unauthorised persons in the area of transportation
always position the loading brackets into the points indicated
always introduce the brackets completely.
distribute the weight of the cabinet to ensure balance of the load
barycenter(Fig. 3)
WARNING! Heavy object in motion. Flattening
Follow the instructions for safe handling
Dragging Subsidence/deformations/jerking
- DO NOT drag/push the cabinet
- Follow the instructions for safe handling
The cabinets must be stored indoors, with a temperature ranging
between-25°C and +55°C and air humidity between 30% and 90%.
before storing, ensure that the packaging is intact and without defects to
avoid compromising conservation of the cabinets.
Ultraviolet rays. Permanent deformation of the plastics/damage to the
cabinet components.
DO NOT store the cabinets in uncovered areas exposed to
atmospheric agents and to direct sunlight.
05060154 00 26/05/2014