Introduction; 1�1 Symbols Used - Renfert PROMIX one Mode D'emploi

1

Introduction

en
1.1 Symbols used
In the instructions for use and on the equipment itself, you will find these symbols with the following
meanings:
Follow the Instructions for Use!
Danger
Immediate risk of injury. Consult accompanying documents!
Electrical current
This indicates a risk of injury due to electrical current.
Caution
Risk of damage to the equipment if the instruction is not followed.
Notice
A general notice that improves and eases use.
The operating instructions can be found in electronic format on our website.
Visit www.renfert.com/p915. Enter the following item number: 27 7000 0000.
The EU regulations applicable to the product are adhered to.
Not for permanent operation!
After two mixing processes in succession, ensure that there is a pause of 7 minutes.
Protection class II
Within the EU, this equipment is subject to the provisions of the directive 2002/96/EC
(WEEE Directive).
Only to be used by specialist staff.
Manufacturer
Date of manufacture
Medical device
Permitted temperature range for transport and storage temperature. Refer to Chapter 2.4.
Permitted humidity range for transport and storage temperature. Refer to Chapter 2.4.
Permitted air pressure range for transport and storage temperature. Refer to Chapter 2.4.
► List, particular attention should be paid
• List
- Subordinate list
⇒ Instructions / appropriate action / input / operational sequence:
You will be asked to carry out the action in a specified order.
♦ Result of an action / reaction of the equipment / reaction of the program:
The equipment or program reacts as a result of your actions or when a specific incident occurs.
Other symbols are explained as they occur�
1.2 EU Conformity
Renfert GmbH hereby declares that this product:
Item number: 277000x000
complies with the following European regulations: Regulation (EU) 2017/745
PROMIX one™
- 2 -