Hach NA5600 sc Na+ Mode D'emploi page 29

Option
SAVE LOGS
MANAGE
CONFIGURATION
WORK WITH
DEVICES
4. When done, remove the SD card from the analyzer.
5. Install the cover for the SD card slot to keep the environmental rating of the enclosure.
Figure 11 SD card slot location
1 SD card slot
6.5 Install the latest software version
Install the latest software version on the analyzer. The analyzer settings do not change when a new
software version is installed. Data saved to the analyzer is not deleted when a new software version
is installed.
Note: To identify the software version that is installed on the analyzer, push menu and select VIEW DATA >
ANALYZER DATA. Look for "SOFTWARE VERS".
Items to collect:
• SD card (2 GB or more)
• PC with SD card slot and internet access
Description
Saves the data log file to the HACH/Logs/ANALYZER_xxxx folder on the
SD card. Open the data log file, ANALYZER_NAME_DL.xml, with
Internet Explorer or Excel.
Saves the event log file to the HACH/Logs/ANALYZER_xxxx folder on
the SD card in CSV (comma-separated value) file format. Open the
event log file, ANALYZER_NAME_EL.csv, with Excel.
Options: LAST DAY, LAST WEEK, LAST MONTH, ALL or NEW.
Note: To save the other logs files to the SD card, refer to the WORK WITH
DEVICES option.
BACKUP SETTINGS—Saves the analyzer settings to the SD card.
TRANSFER SETTINGS—Installs the analyzer setting saved to the SD
card on the analyzer.
READ DEVICE FILES—Saves the selected device data to the
HACH/Devices folder on the SD card in CSV file format. Options: GRAB
SAMPLE DATA, CAL HISTORY, SENSOR DIAG, MEASUREMENT
DATA (curve data for calibrations and grab sample measurements) and
SERVICE HISTORY. WRITE DEVICE FILE—Installs a new version of
the measurement cycle script.
Note: The WRITE DEVICE FILE option only shows when a new version of the
measurement cycle script is on the SD card.
English 29