Dynacord PowerMate 2200 Mode D'emploi page 56

MASTER PATCHBAY AND INSTALLATION ALTERNATIVES
3. Using the internal power amplifi er for monitoring or side-fi ll purposes:
In case you want to use an external power amplifi er to drive your main speaker systems, the internal power am-
plifi er can be used for monitoring and side-fi ll purposes. Use short patch-cables to connect the AUX3 OUTPUT
with the EQ INPUT L and the MONO OUTPUT with the EQ INPUT R. This enables you to use the internal graphic
equalizer to separately adjust the signals of the monitor and the side-fi ll output channels. The volume of the main
channels can still be controlled via the master faders. The monitor speakers' volume is determined by the setting
of the AUX3 fader while the MONO-fader controls the volume of the side-fi ll channel.
4. Monaural sound reinforcement with monitoring:
Your application does not demand for stereophonic audio reproduction. In that case you can use short patch-
cables to connect the MONO OUTPUT with the EQ INPUT R and the AUX3 OUTPUT with the EQ INPUT L. The
right main output is used for the sound reinforcement while the left main output carries the monitor signal.
56