flamco Meibes MeiFlow TOP S-Line MC-X Instructions De Montage page 5

Regulations
When carrying out work, you must comply with:
- The statutory accident prevention regulations,
- The statutory environmental protection regulations,
- The German Employer's Liability Insurance Association regulations,
- The pertinent safety requirements of DIN, EN, DVGW, TRGI, TRF and VDE,
- ÖNORM, EN, ÖVGW-TR Gas, ÖVGW-TRF and ÖVE,
- SEV, SUVA, SVGW, SVTI, SWKI and VKF
- and all region- or country-specific regulations and standards
Instructions for working on the system
- Disconnect the system from the mains and monitor it to ensure that no voltage is being supplied
(e.g. at the separate cut-out or a main switch).
- Secure the system against being restarted.
Permissible mains supply und operating parameters
- Heating side / primary side:
max. permissible pressure rating:
- permissible operating temperature:
- permissible ambient temperature:
- Approved medium (cf. DIN EN 12828):
- The pump groups may only be installed in dry and not potentially explosive environments
- The pump group must be mounted inside a building in closed, frost-free rooms, in an upright
position on the wall, in a convenient location with sufficient frost protection (when used for
water-based cooling systems)
- Any noise emissions or radiant heat from the station must be taken into account in the choice
of installation site
- Observe the safety areas in accordance with EN 60529 when designing and installing the system
- Prevent oxygen from entering the medium.
We reserve the right to change designs and technical specifications of our products.
PN 6
min. see Chap. 1.3 (Diagrams)
max. 50°C
5 – 50°C (non-condensing)
Heating water according to VDI
2035 (not corrosive)
5