ITALVIBRAS GIORGIO SILINGARDI MVSI Serie Guide Technique page 18

ENGLISH
INDEX
SECTION 1: Description and main features . .........................................18
1.0 Presentation.....................................................................................18
1.1 Warranty ..........................................................................................18
1.2 Identification.....................................................................................18
1.3 Description of the vibrator . ...............................................................18
1.4 Use of the vibrator ...........................................................................18
1.5 Technical features . ...........................................................................18
SECTION 2: Safety regulations . ............................................................19
2.0 Safety...............................................................................................19
2.1 General safety regulations . ..............................................................19
SECTION 3: Handling and installation ..................................................19
3.0 Before installation ............................................................................19
3.1 Installation........................................................................................19
3.1.0 Installation on machine under MD Machinery Directive.............20
3.2 Electrical connection . .......................................................................20
3.3 Terminal board wiring diagrams . ......................................................20
3.4 Fixing the power supply cable to the vibrator terminal board ..........20
3.5 Fixing the power supply cable to the network . .................................20
3.6 Power supply with frequency variator ..............................................21
SECTION 4: Use of the vibrator ............................................................21
4.0 Preliminary checks...........................................................................21
4.1 Vibration force adjustment ...............................................................21
4.2 Start-up and shutdown of the motor vibrator during use..................21
SECTION 5: Maintenance of the vibrator ..............................................21
5.0 Bearing replacement........................................................................22
5.1 Lubrication .......................................................................................22
5.2 Spare parts ......................................................................................23
TABLES: Electro-mechanical features – Overall dimensions
Figures for execution reference ....................................................... 77-80
Tables .............................................................................................. 81-91
Weight adjustment and bearings/lubrication data . ......................... 92-102
Spare parts tables........................................................................ 103-108
Description of spare parts . ............................................................109-112
Coupling torques..................................................................................113
Declaration of incorporation .............................................................117
EC Declaration of conformity ...........................................................119
Certification ATEX/IECEX ..................................................................123
SECTION 1
Description and main features
–
1.0 PRESENTATION
This manual states the information, and all considered necessary for
the understanding, installation, correct use and maintenance of the
MVSI, M3 Series, ITV-VR, ITVAF Vibrators manufactured by Italvi-
bras Giorgio Silingardi S.p.a. of Fiorano (Modena) Italy. All stated
does not make up a complete description of the various elements or
a detailed description of their functioning. The user will however find
all information normally useful for correct installation, correct, safe
use and for good preservation of the vibrator.Normal functioning,
duration and operating costs of the vibrator depends on compliance
with the afore-mentioned prescriptions.Lack of compliance with the
regulations described in this booklet, negligence and an incorrect
and inadequate use of the vibrator may cause ITALVIBRAS to void
the warranty it gives to the vibrator.
On receipt of the vibrator check that:
- Packaging, if envisioned, has not deteriorated to the point of
having damaged the vibrator;
- The supply corresponds to order specifications (see the
transport document);
- There is no external damage to the vibrator.
If the supply does not correspond to the order or the vibrator is exter-
nally damaged, inform both the forwarding agent and ITALVIBRAS
or its local representative, immediately.
ITALVIBRAS, is however at complete disposal to ensure quick and
accurate technical assistance and for all that may be necessary for
improved functioning and to obtain maximum performance from the
vibrator.
1.1 WARRANTY
The Manufacturer, as well as that stated in the supply contract, guaran-
tees its products for a period of 12 (twelve) months from the delivery
date. This warranty is only applied in the free repair or replacement
of those parts which, after careful examination by the Manufacturer's
technical office, result faulty. The warranty, with exclusion of all liability
for direct or indirect damage, is limited to defects in materials and
ceases to have effect whenever the returned parts are disassembled,
tampered with or repaired outside of the factory.
Damage deriving from negligence, carelessness, incorrect and im-
proper use of the vibrator, incorrect manoeuvres by the operator and
incorrect installation are also excluded from the warranty.
Removal of the vibrator safety devices, will automatically cause
the warranty to be forfeited along with liability of the Manufacturer.
The warranty is also forfeited whenever non-original spare parts
are used.
The returned material, even if under warranty must be delivered
with carriage paid.
1.2 IDENTIFICATION
The vibrator's serial number is embossed on the identification plate
(6 Fig. 1, page 8). This plate, as well as other various data, states:
A) Vibrator type;
B) Vibrator series;
C) Serial number.
This information must always be stated when requesting spare parts
or a technical intervention.
1.3 DESCRIPTION OF THE VIBRATOR
The vibrator has been built in compliance with that envisioned by
the regulations in force prescribed by the European Community, and
in particular with:
- Insulation class F;
- Tropicalised winding;
- IP66 mechanical protection (EN 60529), IK08 shock-resistance
level (EN 50102);
- Admitted environmental temperature to ensure the indicated per-
formance -20° C ÷ +40° C;
- Electrical construction according to Regulation EN 60034-1;
- Airborne noise measured in free field ≤ 70 dB (A) sec. IEC.
Description Fig. 1 (page ):
1 Cable-gland for electrical power supply cable entry;
2 Casing;
3 Weight cover;
4 Support and fixing feet;
5 Coupling bracket for lifting and safety;
6 Identification plate.
1.4 USE OF THE VIBRATOR
The vibrators listed in this booklet have been designed and built
for specific needs and relative to use on vibrating machines.
This vibrator, cannot be commissioned before the machine into
which it will be incorporated has been declared in compliance
with the dispositions in the 2006/46/EC Directive and successive
amendments. In the field of the Directive 2006/42/EC the MVSI,
M3, ITVAF, ITV-VR electric vibrators are "partly completed ma-
chinery". Its use for jobs different from those envisioned and
non-conform to that described in this booklet, as well as being
considered improper and prohibited, releases the Manufacturer
from any direct and/or indirect liability.
1.5 TECHNICAL FEATURES
See the specific tables starting from page 77 for the «Technical
Features» of the individual vibrators.
1
ENGLISH