Siemens SINAMICS G130 Manuel page 993

n_ctrl config
p1400[D]
1 2
DO: VECTOR, VECTORGL, VECTORMV, VECTORSL
Vector control - Speed control configuration
Speed control configuration
Bit No. Meaning
0 1 = Automatic Kp/Tn adaptation active
1 1 = Sensorless vector control, freeze I component
1 = Acceleration pre-control, external source (p1495)
2
0 = Acceleration pre-control, internal source (n_set)
3 1 = Reference model, speed setpoint I component ON
4 Reserved
5 1 = Kp/Tn adaptation active
6 1 = Free Tn adaptation active
7 Reserved
8 Reserved
9 Reserved
10 Reserved
11 Reserved
12 Reserved
13 Reserved
1 = Torque pre-control always active
14
0 = Torque pre-control for n_ctrl enabled
15 1 = Sensorless vector control, speed pre-control active
3 4
Factory setting
1 [6040.3]
0 [6040.3]
0 [6031.2]
0 [6031.1][6031.7]
1 [6040.3]
0 [6050.6]
0 [6060.4]
1 [6030.5]
5 6
Function diagram
fp_6490_51_eng.vsd
SINAMICS
29.06.09 V04.03.01
p0115[1] (Motor Modules)
Refer to [1020.7]
7 8
- 6490 -