Siemens SINAMICS G130 Manuel page 955

Ackn all faults p2102[C]
<1>
1. Acknowledge p2103[C]
<2>
2. Acknowledge p2104[C]
<2>
3. Acknowledge p2105[C]
<2>
Pulse generator
p2108[C] (1) p3110 [ms]
<2>
p3111[C] (1)
T 0
<2>
p3112[C] (0)
<2>
<1> This parameter refers to the Control Unit and is
used as source to simultaneously acknowledge
all faults on all drive objects.
<2>
These parameters refer to the Command Data Sets (CDS)
depending on the individual drive object (DO).
1 2
DO: All objects
Internal control/status words - Control word, faults/alarms
PROFIdrive bit
Bit No.
0
1
2
3
4
5
6
7
8
9
p2112[C] (1)
1
10
<2>
p2116[C] (1)
1 11
<2>
p2117[C] (1)
<2>
1
12
p2106[C] (1)
1
<2> 13
p2107[C] (1)
1
<2> 14
1 15
3 4
Control word, faults/alarms
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
= Acknowledge faults
Reserved
Reserved
= External alarm 1 (A07850)
= External alarm 2 (A07851)
= External alarm 3 (A07852)
= External fault 1 (F07860)
= External fault 2 (F07861)
= External fault 3 (F07862)
5 6
fp_2546_51_eng.vsd
08.05.08 V04.03.01
4000.00 μs
STW faults/alarms
r2138
r2138.7
To fault buffer [8060.1]
r2138.10 To alarm buffer [8065.1]
r2138.11 To alarm buffer [8065.1]
r2138.12 To alarm buffer [8065.1]
r2138.13 To fault buffer [8060.1]
r2138.14 To fault buffer [8060.1]
r2138.15 To fault buffer [8060.1]
7 8
Function diagram
- 2546 -
SINAMICS