Ecolab My Control Manuel D'utilisation page 164

Software description
7.2.4.4.1 WE
Fig. 56: Configuration -> Dosing Programm -> WE
Select the WE
Select Program number.
n Program category: definition of the category of linen.
n Nominal load: weight in % depending of the nominal capacity.
n Dosing step number: number of step in the washing program, 25 step maxi in the
wash program.
Theoretical Wash time: therotical time of the washing program.
n Extra time: time of the last step using when you don't have stop signal programmed on
the WE.
n Cool down step: step for refresh cycle.
Send programs to helms: updating of all WE's programs in Helms.
n Choice on any push button to go in the request mode.
n Selection and activation of each push button in green.
n No selection and no activation if each push button in grey.
n Choice on any push button to go in the request mode.
Available Menue:
Back to Dosing Program:
Ä Chapter 7.2.4.4 'Dosing Programm' on page 65.
see chapter
Dosage:
see chapter Ä Chapter 7.2.4.4.1.1 'Dosage' on page 67.
pH alarms parameters:
Ä Chapter 7.2.4.4.1.2 'pH alarm parameters' on page 68.
see chapter
Temperature alarms parameters:
Ä Chapter 7.2.4.4.1.3 'Temperature alarm parameters' on page 69.
see chapter
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
417101971 Rev. 2-02.2019 66