Water Flowswitch Allocation; Connexx - Ecolab My Control Manuel D'utilisation

7.2.4.1.1 Water flowswitch allocation

Fig. 33: Manual Mode -> Main Equipment
Select all required datas:
n Programmation of flow switch
n Water flow switch allocation
n (1 - - - 6) on each dosing line (1 - - - 6)
n Flow switch number = 0 = no control
n Scroll up and down with arrow
Available Menue:
Back to Configuration:
see chapter Ä Chapter 7.2.4 'Configuration level access' on page 45.
Back to Main Screen:
see chapter Ä Chapter 7.2 'System Start - Main Screen' on page 34.

7.2.4.1.2 Connexx

Configuration -> General -> Connexx
Available Menue:
Back to Configuration:
see chapter Ä Chapter 7.2.4 'Configuration level access' on page 45.
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
Select all required datas Connexx
programmation and selection:
Connexx alarm Max time to reach the level before
delay: to generate the alarm
Connexx level Hystereris time on the level to
delay: manage the amount valve
Connexx enable Border in green means: enabled
47
Software description
417101971 Rev. 2-02.2019