Environmental Protection Measures; Obligations Of The Operator; Installation, Maintenance And Repairs - Ecolab My Control Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.8

Environmental protection measures

ENVIRONMENT!
The environmental symbol denotes environmental protection measures.
2.9

Obligations of the operator

In the EEA (European Economic Area), national implementation of the
Directive (89/391/EEC) and corresponding individual directives, in particular
the Directive (2009/104/EC) concerning the minimum safety and health
requirements for the use of work equipment by workers at work, as amended,
are to be observed and adhered to.
The operator must adhere to the local legal provisions for:
n
personnel safety (employers' insurance association and accident prevention
regulations, workplace directives), e.g. operating instructions, including those in
accordance with Section 20 Hazardous Substances Ordinance (GefStoffV), personal
protective equipment (PPE), health screening;
safety of work materials and tools (protective equipment, work instructions, procedural
n
risks and maintenance);
n
product procurement (safety data sheets, list of hazardous substances);
disposal of products (Waste Act);
n
n
disposal of materials (decommissioning, Waste Act);
n
cleaning (detergents and disposal);
n
as well as complying with current environment protection regulations.
The owner is also required:
n
to provide personal protective equipment (PPE).
to incorporate the measures into operating instructions and to instruct personnel
n
accordingly;
n
for operating sites (from 1m above ground): to provide safe access;
to provide suitable workplace lighting in accordance with ASR 7/3.
n
n
to ensure that local regulations are complied with during installation and
commissioning, if these procedures are conducted by the owner.
2.10

Installation, Maintenance and Repairs

NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools during assembly,
maintenance or troubleshooting. Only use the correct tools.
19
Safety
417101971 Rev. 2-02.2019

Publicité

Table des Matières
loading

Table des Matières