Dosing Line; Dosing Programm - Ecolab My Control Manuel D'utilisation

7.2.4.3.4 Dosing line

Fig. 54: Configuration -> Equipment -> Dosing line
Select the required Line
Mid size mode = Turbo Compact Mode (TC mode):
n Configuration of the line Turbo Compact
n Defined in TC mode, if the auxiliary pump is used
n Rinse check through a flow meter in TC mode
n You can modify the selection by action on "Modify Data".
Available Menue:
Back to Equipment:
Ä Chapter 7.2.4.3 'Equipment' on page 61.
see chapter
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter

7.2.4.4 Dosing Programm

Fig. 55: Configuration -> Dosing Programm
Choice on any push button to go in the request mode.
Available Menue:
Back to Configuration:
Ä Chapter 7.2.4 'Configuration level access' on page 45.
see chapter
WE:
see chapter Ä Chapter 7.2.4.4.1 'WE' on page 66.
TUN 1 & 2:
see chapter Ä Chapter 7.2.4.4.2 'Tunnel 1 & 2' on page 70.
Back to Main Screen:
see chapter Ä Chapter 7.2 'System Start - Main Screen' on page 34.
65
Software description
417101971 Rev. 2-02.2019