Manual Mode - Main Equipment; Alarms - Ecolab My Control Manuel D'utilisation

Start-Up
6.2.6 Manual mode – Main Equipment
Press the "Main Equipment" button (
Alarms' on page 28,Fig. 7, Pos. 2) on the control's touch screen
Fig. 11: Manual mode – Main Equipment
Pos. 1:
Selection of manual dosing:
Calibration: Product dosing only
Dosing: Normal dosing process
Flush: Flush process
6.2.7

Alarms

Press the "Alarm" button (
on page 28,Fig. 7, Pos. 2) on the control's touch screen.
Fig. 12: Alarms
1 Overview of all active alarm messages
2 Number of active alarm messages
3 Scroll up
4 Scroll down
5 Active alarm message indicator (in all screens)
6 Touching an active alarm message switches it to
"Alarm details" (
display and detailed display of alarm messages'
on page 31)
417101971 Rev. 2-02.2019
Ä Chapter 6.2.2 'Changeover to Manual mode /
Ä Chapter 6.2.2 'Changeover to Manual mode / Alarms'
Ä Chapter 6.2.7.1 'Alarms – History
B Return to Main menu
C Changes to "Alarm History" (
6.2.7.1 'Alarms – History display and detailed display
of alarm messages' on page 31)
D Reset all active alarm messages
30
Ä Chapter