Ecolab My Control Manuel D'utilisation page 157

Temperature parameters
Fig. 48: Configuration -> Machine -> Tunnel 1 & 2 -> Counters & Analog values configuration -> Temperature parameters
Select the Tunnel
Selection of Tunnel number
Temperatures configuration:
6 Temperatures available
n
n Calibration adjustment for 20mA
For each you have to select:
n One calibration value
n 4 – 20 mA selection (green color)
n 0 – 20mA selection (white color)
Compartment number
n
n Equipment number (option, if the equipment is linked with the temperature).
Available Menue:
One step back:
Ä Chapter 7.2.4.2.2.4 'Counters & Analog values configuration' on page 57.
see chapter
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
59
Software description
417101971 Rev. 2-02.2019