Ecolab My Control Manuel D'utilisation page 150

Software description
Stop conditions
Fig. 40: Configuration -> Machine -> WE -> Stop conditions
Select the WE
Stop selection:
n Define which kind of activation's condition "ON HOLD" You want to select for stoping
the Washer Extractor
n 1-Emergency/air pressure/low voltage
2-Flush water alarm
n
n 3-.... /....
n 4-.... /....
n 5-.... /....
n 100-.... /....
n 154-Flowswitch alarm WE
Scroll up and down with arrow (selected when is green).
Available Menue:
Back to Configuration/Machine/WE:
Ä Chapter 7.2.4.2.1 'WE' on page 49.
see chapter
Back to Main Screen:
see chapter Ä Chapter 7.2 'System Start - Main Screen' on page 34.
417101971 Rev. 2-02.2019 52