Ecolab My Control Manuel D'utilisation page 154

Software description
Stop & Eject conditions
Fig. 44: Configuration -> Machine -> Tunnel 1 & 2 -> Stop & Eject conditions
Select the Tunnel
Selection of Tunnel number
Stop selection:
1- Emergency/air pressure/low voltage
n
n 2- Flush water alarm
3- .... /....
n
n 10- .... /....
n 50- .... /....
n 100- .... /....
n 161- LF maximum time alarm TUN
1. You have to define which kind of activation's condition '"ON HOLD"' and '"EJECT"'
you want to select for stoping the Tunnel.
2. Scroll up and down with arrow (selected when is green).
Available Menue:
Back to Configuration/Machine/TUN 1&2:
see chapter Ä Chapter 7.2.4.2.2 'Tunnel 1 & 2' on page 54.
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
417101971 Rev. 2-02.2019 56