Ecolab My Control Manuel D'utilisation page 155

T.O.M. Signals
Fig. 45: Configuration -> Machine -> Tunnel 1 & 2 -> T.O.M Signals
Select the Tunnel
Selection of Tunnel number
Configuration of the T.O.M.:
22 Equipments number available
n
n 22 Dosing points number available
Configuration of T.O.M. signals
n
1. Scroll up and down with arrow.
2. Selection by pushing up and down arrow.
Available Menue:
Back to Configuration/Machine/TUN 1&2:
see chapter Ä Chapter 7.2.4.2.2 'Tunnel 1 & 2' on page 54.
Back to Main Screen:
see chapter Ä Chapter 7.2 'System Start - Main Screen' on page 34.
Counters & Analog values configuration
Fig. 46: Configuration -> Machine -> Tunnel 1 & 2 -> Counters & Analog values configuration
Choice on any push button to go in the request mode.
Available Menue:
Back to Configuration/Machine/TUN 1&2:
Ä Chapter 7.2.4.2.2 'Tunnel 1 & 2' on page 54.
see chapter
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
57
Software description
417101971 Rev. 2-02.2019