Storage; Equipment Marking - Rating Plate; Warranty - Ecolab My Control Manuel D'utilisation

1.7

Storage

Under certain circumstances, instructions for storage, which go beyond the
requirements listed here, can be found on the package.
These must be observed accordingly.
Please note the following storage conditions:
n Do not store outdoors.
n Store in a dry and dust-free place.
n Do not expose to aggressive media.
Protect from sunlight.
n
n Avoid mechanical vibrations.
Storage temperature and relative humidity:
n
Follow the information in section "Technical data".
n For storage periods of more than 3 months, check the general condition of all parts
and packaging regularly.
If necessary, refresh or renew the preservative.
1.8 Equipment marking – Rating plate
Refer to the section entitled "Identifying the device version" for information on
device identification and on the rating plate.
It is important for all queries to state the correct name and type. This is the only
way of ensuring that we can answer your query correctly and quickly.
1.9

Warranty

The manufacturer provides a warranty for operational safety, reliability and
performance under the following conditions only:
n Assembly, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists with the aid of the User Manual and all the
provided documents.
n Our products are used in accordance with the instructions in the User Manual.
n Only original equipment spare parts are to be used for repairs.
Our products are built, tested and CE certified in accordance with current
standards/guidelines. They left the factory in a safe, faultless condition.
To keep the equipment in this condition and to ensure risk-free operation, the
user must observe the instructions / warnings, maintenance regulations, etc.
contained in these operating instructions and, if applicable, affixed to the
product.
The general warranty and service conditions of the manufacturer also
apply.
11
General
417101971 Rev. 2-02.2019