Ecolab My Control Manuel D'utilisation page 162

Software description
7.2.4.3.3 Level analog
Fig. 53: Configuration -> Equipment -> Level analog
Select the Analog level
to visualise.
Select Analog Level: activation of the analogue level request (If you have a storage tank
with analog device).
Analog level set up:
n 1/ Empty alarm level: quantity corresponding to empty product
n 2/ Low level: Minimum quantity in (L)
n 3/ High level: Maximum quantity in (L)
n 4/ Max alarm level: Highest quantity before overflow in (L)
n 1/2/3/4: definition of the minimum value of the selected level
Level calibration: calibration for 20mA
n
n Level activated: activation of the analog level
Signal 4...20 mA: Green=4-20mA; Grey=0-20mA
n
Available Menue:
Back to Equipment:
see chapter Ä Chapter 7.2.4.3 'Equipment' on page 61.
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
417101971 Rev. 2-02.2019 64