Ecolab My Control Manuel D'utilisation page 136

Software description
Select the required WE:
n Visualisation of the product quantity already dosed in the current program.
n Dose number.
n Step when the product was dosed
Equipment concerned
Dosed quantity.
Scroll up and down with arrow.
Available Menue:
Back to Wash-Extractor (WE)
Ä Chapter 7.2.2.1 'Wash-Extractor (WE)' on page 37.
see chapter
Back to Main Screen
see chapter Ä Chapter 7.2.2 'Visualisation' on page 36.
7.2.2.2 TUN 1 & 2 (Tunnel 1 & 2)
Fig. 21: Visualisation -> Tunnel 1& 2
Select the Tunnel
Touch the screen on the tunnel button, will appear a key board to select the tunnel
number.
You can see:
n water counters
temperatures indicators
n
n pH1 and pH2 or pH waste water
LF
n
n Weight
Choice on any push button to go in the request mode.
Available Menue:
Back to Visualisation:
Ä Chapter 7.2.2 'Visualisation' on page 36.
see chapter
Dosage
Ä Chapter 7.2.2.2.1 'Dosage' on page 39.
see chapter
Conveyor TUN 1 & 2 Visualisation:
see chapter Ä Chapter 7.2.2.2.2 'Conveyor Tunnel 1 & 2' on page 39.
TUN 1 & 2 Visualisation:
Ä Chapter 7.2.2.2.3 'Visualisation Tunnel 1 & 2' on page 40.
see chapter
Back to Main Screen:
see chapter Ä Chapter 7.2.2 'Visualisation' on page 36.
417101971 Rev. 2-02.2019 38