Ecolab My Control Manuel D'utilisation page 158

Software description
pH & LF & weight calibration
Fig. 49: Configuration -> Machine -> Tunnel 1 & 2 -> Counters & Analog values configuration -> pH & LF configuration
Select the Tunnel
Selection of Tunnel number
Configuration of pH & LF:
You have to configure the following information:
n pH1 calibration: 4...20 mA Compart. Nb: Equipt. Nb :
n pH2 calibration: 4...20 mA Compart. Nb:
LH calibration: 4...20 mA Compart. Nb: Equipt. Nb:
n
n Weight cal.: 4...20 mA
n pH1 regulation and alarm
n pH2 alarm only
n LF regulation and alarm
n Weight configuration
Selection by pushing up and down arrow.
Available Menue:
One step back:
Ä Chapter 7.2.4.2.2.4 'Counters & Analog values configuration' on page 57.
see chapter
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
417101971 Rev. 2-02.2019 60