Conveyor Tunnel 1 & 2 - Ecolab My Control Manuel D'utilisation

7.2.2.2.1 Dosage
Fig. 22: TUN 1 & 2 -> Dosage
Select the Tunnel / Select the Compart.
The information displayed on this screen corresponds to the product quantities already
dosed on the batch which is in this compartment.
Scroll up and down with arrow.
Available Menue:
Back to TUN 1 & 2:
Ä Chapter 7.2.2.2 'TUN 1 & 2 (Tunnel 1 & 2)' on page 38.
see chapter
Back to Main Screen:
Ä Chapter 7.2.2 'Visualisation' on page 36.
see chapter
7.2.2.2.2 Conveyor Tunnel 1 & 2
Fig. 23: TUN 1 & 2 -> Conveyor Tunnel 1 & 2
Select the Tunnel
The information displayed on this screen corresponds to the program information already
dosed on the batch which is in this conveyor.
To validate the modified data's, it's necessary to push on the "transmit data" button.
Available Menue:
Back to TUN 1 & 2:
see chapter Ä Chapter 7.2.2.2 'TUN 1 & 2 (Tunnel 1 & 2)' on page 38.
Back to Main Screen:
Ä Chapter 7.2.2 'Visualisation' on page 36.
see chapter
39
Software description
417101971 Rev. 2-02.2019