The Proper Handling Of The Device; Items Supplied And Device Overview - DS Produkte QF-893 Mode D'emploi

EN

The Proper Handling of the Device

■ Read through the assembly instructions carefully before assembling the device. The
sequence of working steps described must be followed exactly.
■ In the interests of your own safety, inspect the device for any signs of damage every
time before use (loose screws, worn parts, etc.). If there are any defects, the device
may no longer be used until it has been repaired.
■ If the device is broken or damaged, do not attempt to repair the device yourself. In
the event of any damage, please contact the customer service department.
■ Always place the device on a secure, fl at and non-slip surface before you start us-
ing it. Each time before you start using the device, make sure that there is suffi cient
clearance around the device so that you cannot bump into walls, furniture, etc. dur-
ing training.
■ When doing the exercises, wear loose, comfortable clothing and non-slip trainers.
■ Protect the fl oor or carpet with a mat or something similar before you remove the
parts from the box and also during set-up and training.
■ Only one person may train on the training device at any one time.
■ Do not expose the device to extreme temperatures, wide temperature variations, or
direct sunlight.
■ After each use, store the device in a place where children cannot use it.

Items Supplied and Device Overview

1 Main unit
2 Pedals
3 Large footrest
4 Small footrest
5 Cross-head screws
6 Adjusting screw
The batteries are already inserted i, all you have to do is remove the transport
restraint.
16
7 Computer (with 1.5 V battery, AAA or
LR03 type already inserted)
8 Allen key
9 Spanner (size 13 and 15)
• These operating instructions