Functions Of The Computer; Before Initial Use; Unpacking The Items Supplied; Assembling The Device - DS Produkte QF-893 Mode D'emploi

Functions of the Computer

You can use the MODE / RESET button to switch between the following information
displays:
To delete all of the data, hold the MODE / RESET button down for approx. 5
seconds.

Before Initial Use

Before you can use the device, you must:
• unpack the items supplied,
• assemble the device.

Unpacking the Items Supplied

CAUTION!
■ Keep children and animals away from the packaging material. There is a danger of
suffocation!
Unpack all parts and check the items supplied for completeness (see the "Items Supplied
and Device Overview" chapter) and transport damage. If you fi nd any damage to the
components, do not use them (!), but contact the customer service department.

Assembling the Device

Take all parts out of the packaging and place them carefully on a level surface. To be
on the safe side, place a protective fi lm underneath the parts to prevent any damage
to delicate surfaces. Remove all packaging materials from the area in which you are
working. Only dispose of the packaging material once you have inspected all parts to
make sure they are complete and for any signs of transport damage, and after you have
fi nished assembling the device. Follow these instructions step by step in order to avoid
any errors during set-up and use:
17
DIST The distance covered.
CAL Shows roughly how many calories have
been used up.
SCAN Each display is shown for a few seconds.
TIME Training time in minutes and seconds.
SPD Indicates the speed of rotation.
EN