Use - DS Produkte QF-893 Mode D'emploi

EN
4. Place the two pedals into the pedal mounts and turn the pedals so that they are fi rmly
attached using the spanner (size 15) which is supplied with the device.
The pedals and the pedal mounts are marked with L for left and R for right. Make
sure that they match up when assembling the device.

Use

CAUTION!
■ In the interests of your own safety, inspect the device for any signs of damage every
time before use (loose screws, worn parts, etc.). If there are any defects, the device
may no longer be used until it has been repaired.
■ If the device is broken or damaged, do not attempt to repair the device yourself. In
the event of any damage, please contact the customer service department.
■ Always place the device on a secure, fl at and non-slip surface before you start us-
ing it. Each time before you start using the device, make sure that there is suffi cient
clearance around the device so that you cannot bump into walls, furniture, etc. dur-
ing training.
■ When doing the exercises, wear loose, comfortable clothing and non-slip trainers.
■ Only one person may train on the training device at any one time.
■ If your health means that you belong to a risk group, you should always consult your
doctor before using the device. If necessary, coordinate your training programme
with him.
18
1. Slide the small footrest onto the
matching mounting bracket on the
main unit (on the computer side).
2. Now slide the large footrests onto the
other mounting bracket.
3. Turn the main unit "upside down", and
with two screws in each case screw
on the two footrests using the Allen
key which is supplied with the device.
The right pedal (right-hand thread) labelled R is
tightened in the clockwise direction.
The left pedal (left-hand thread) labelled L is
tightened in the anticlockwise direction.