Setting Up And Connecting The Device; Preparing The Device For Use - DS Produkte 05110 Mode D'emploi

Setting Up and Connecting the Device

PLEASE NOTE!
■ Only connect the device to a plug socket that is properly installed and matches the
technical data of the device. The plug socket must also be readily accessible after
connection so that the connection to the mains can quickly be isolated.
■ Lay the connecting cable in such a way that it does not become crushed or kinked
and does not come into contact with hot surfaces.
1. Place the device on a dry, even and fi rm surface. If the device is used on a carpet,
make sure that the ventilation openings on the bottom of the device remain clear.
Protect sensitive fl oor coverings on which the device is placed with a mat if
necessary.
2 m 2 m
1 - 1,6 m m
1 m m
2. First connect the connecting cable to the socket (8) of the device and then to a prop-
erly installed, easily accessible plug socket.

Preparing the Device for Use

Folding Out / Folding In the Stabilizers
The stabilizers (4) must be folded out for step aerobic exercises. They prevent the vibrat-
ing plate from moving and give it additional stability. The stabilizers are located on the
sides of the device.
19
Depending on your body size, leave plenty of
space on all sides of the training device (at
least 1 metre to the sides, 2 metres above) so
that you have enough room to move about in
during a workout. Furthermore, the free area in
the direction from which you access the training
device must be at least 0.6 m greater than the
exercise area. The free area must include the
space required for an emergency dismount. If
training devices are set up in the immediate vi-
1 1 m cinity of one another, they can share one free
area.
1 - 1,6 m
A little force may be required to fold the stabilizers in / out.
Caution! Watch your fi ngers! There is a risk of trapping!
Folding out: Twist the stabilizer into the vertical position.
Folding in: Twist the stabilizer into the horizontal position.
EN