7.2
Electrical installation
7.2.1
Mains supply connection
7.2.2
Mains connector
7.2.2.1 Mains connector layout
7.2.2.2 Mains connector - cable assignment
Fig. 7.16
Cable
connection
417102213_EDP L_V15.docx
Fig. 7.13
Connect the mains connector provided
(see chapter
3
Scope of delivery) on the mains connection
of the pump (pos. 1) and hand-tighten it.
Fig. 7.14
The mains connector (pos. 1) is coded and can only be inserted
in one position into the bush of the pump (see Fig. 7.13, Item 1).
Attach the connector to the bush by means of the knurled nut
(pos. 2) and hand-tighten it.
Item
Description
1
Mains connector
2
Knurled nut
Item
Description
1
Cable connections
2
Seal
3
Cable fixing
4
Connector housing
5
Intermediate screw fitting
6
Cable clamp
7
Connector insert with clamps
Fig. 7.15
Fig. 7.17
Plug-and-socket
connection
- 44 -
Item
Description
1
L1
2
N
PE
Rev. 1.10.11