Identification Of The Main Components - AL-KO BKS 2625 T Traduction Du Mode D'emploi D'origine

How to use this manual
Descriptive symbols on the machine (if ap-
plied)
11 Mixture tank
12 Chain oil tank
13 Engine off switch
The engine starts with the
switch in position «I».
The engine stops immediately
when the switch is set to «O».
14 Carburettor setting
L = mixture control,
low speed
H = mixture control,
high speed
T - ID LE - MIN =
idle setting
15 Choke lever (starter)
Starting when the engine is
cold
Starting when the engine is
warm
Operation
16 Chain brake (the symbol indicates
the release direction of the brake)
17 Oil pump controller
When you turn the knob in the
direction of the arrow to the
"MAX" position with a screwd-
river, more oil will flow to the
chain.
When you turn it to the "MIN"
position, less oil will flow.
18 Direction of motion of the chain
469850_d
9 This chain saw is only
suitable for users who
have been trained in
tree maintenance. (see
instructions for use).
IDENTIFICATION OF THE MAIN
COMPONENTS
Main components
1 Engine
2 Front hand guard
3 Front hand grip
4 Rear hand grip
5 Chain interception
bolt
6 Bar
Controls and filling
13 Start/stop switch
14 Speed regulator
15 Throttle lever de-
tent
16 Starter handle
17 Choke lever
7 Chain
8 Chain guard
9 Eyelet
10 Bumper spike
11 Type plate
18 Primer
19 Mixture tank cap
20 Chain oil tank lock
21 Air filter cover
35