Washing Instructions - Tecnica Rollerblade Microblade Free 3WD Informations Techniques

RULES OF THE ROAD
- Before using the skates, know and understand the skating and traffic regulations of
your city, state or country. In some places it is forbidden to skate on the public roads.
- Always wear the protective gear (helmet, wrist-guards, elbow and kneepads).
- Learn inline skating basics; such as braking and turning before going out on the open
path or road.
- Stay alert. Always skate under control.
- Do not use headphones that limit your ability to hear your surroundings while skating.
- Stop skating and inspect your skates immediately if you hear clicking or other unusual
sounds coming from your skates while skating. This could be an indication of a loose bolt
or other damage.
- Always skate with the Allen key provided with your skates in case it is needed to tighten
bolts. Carry in a place on your body that will not cause injury if you fall.
- Avoid debris, rocks, oil, sand, water and uneven or broken pavement.
- Avoid areas with heavy traffic.
- Never hitch yourself along with motorized vehicles.
- Always be aware of your speed on your skates. Think of what could happen at the end of
a steep gradient. A car could come out of a side road or invisible exit. Consider whether
you are capable of braking and stopping downhill. Remember, even the most expert skater
requires time and room to come to a complete halt or avoid unexpected obstacles.
- The manufacturer and distributor of Rollerblade
damage or injury caused by failure to comply with the above instructions. Any such
non-compliance is at the risk of the skater.
LINERS ..............................................................................................
Rollerblade liners are breathable, comfortable and are matched and designed for various
®
appropriate skate and skill levels. They can be also removed from the skate to be washed
and air-dried.

WASHING INSTRUCTIONS

1. Set the washing machine to 30° C (85° F). Do not use strong detergent, softeners, or
solvents.
2. Air-dry liners. Be careful to keep away from any type of heat source. Do not tumble dry.
CLOSURE SYSTEMS ............................................................................
Your skates may include one or more of the features described below. Familiarize yourself
with their function before skating.
- Lace lock - Visual instruction (2 & 3)
- Speedlace / Lacelock - Visual instruction (4,5 & 6)
- Cuff/Instep Ratchet Buckles - Visual instruction (7, 8, 9, 10, 11 & 12)
- Non-ratchet Cuff Buckles- Visual instruction (13, 14 & 15)
- Buckle strap/Tongue Loop- Visual instruction (16 & 17)
WHEELS AND AXLES............................................................................
To get the highest performance from your Rollerblade
of your wheels routinely. If the wheels are worn down or worn unevenly, your grip and
stability could be affected or even become dangerous. Rollerblade
wheel position be rotated on a regular basis, and if the wheels are worn out, to fully
replace them with new wheels.
8
products cannot be held liable for any
®
wheels, rotate and check the wear
®
recommends that the
®