Ac Input Specifications; Dc Output Specifications - Kussmaul Electronics Kussmaul Chief Auto Charge Guide D'utilisation

AC Input Specifications

AC input voltage range
Nominal:
Full:
Automatic derating to 80% output:
Max. AC input current
Power factor at rated load
Frequency
Efficiency – peak
Surge protection
975-1023-01-01
AC 6012 AC 4012
Battery Battery
Charger Charger
110 | 120 | 230 | 240 VAC
80 – 255 VAC
255 – 270 VAC
9 A 5.7 A
≥0.98 ≥0.98
45 – 65 Hz 45 – 65 Hz
89% @ 120 VAC 89% @ 120 VAC
Line-to-neutral Line-to-neutral
surge protector surge protector
rated at rated at
275 VAC 275 VAC

DC Output Specifications

AC 6012 Battery
Charger
a
Battery types Flooded, GEL, AGM, Odyssey,
LFP (lithium iron phosphate)
Battery bank 600 Ah
b
size
Number of 3 separated outputs
isolated
battery bank
outputs
DC (battery) 0 – 16 VDC
output voltage
range
including dead
battery
charging
voltage
Maximum 16 VDC
equalization
voltage
Voltage 14.4 ±0.1 VDC
accuracy (no @ 77 °F (25 °C)
load)
a
Do not mix battery types. Refer to battery manufacturer specifications for correct battery type.
b
Recommended battery bank sizes are tested by the Department of Energy (DOE). Larger and smaller
size batteries could be charged as well, but their use are not automatically verified by DOE.
AC Input Specifications
AC 4012 Battery
Charger
Flooded, GEL, AGM, Odyssey,
LFP (lithium iron phosphate)
400 Ah
3 separated outputs
0 – 16 VDC
16 VDC
14.4 ±0.1 VDC
@ 77 °F (25 °C)
73