Charge Mode - Kussmaul Electronics Kussmaul Chief Auto Charge Guide D'utilisation

Basic Settings
4. Tap
Tap SAVE CHANGES save the new setting
or EXIT WITHOUT CHANGES to disregard
any new setting.
5. Tap
SAVE CHANGES save the new setting or
EXIT WITHOUT CHANGES to disregard any
new setting.
42
to go back to the previous screen.
to go back to the Home screen. Tap
Changing the The charger has two basic charging algorithms.

Charge Mode

A bulk-absorption-float (3-stage) charging
method and a float-only method.
1. From Basic Settings tap the appropriate
battery bank (either BAT1, BAT2, or BAT3).
BAT1
LFP
Float
60 Amp
Recall
from USB
2. Tap Charge Mode.
3. Select by tapping the correct battery
charging method.
4. Tap
Tap SAVE CHANGES save the new setting
or EXIT WITHOUT CHANGES to disregard
any new setting.
5. Tap
SAVE CHANGES save the new setting or
EXIT WITHOUT CHANGES to disregard any
new setting.
Kussmaul Chief Auto Charge Battery Charger Owner's Guide
Basic Settings BAT1 Setup
BAT2 BAT3
Battery Type
Flooded Flooded
Charge Mode
Float 3 Stage
Charge Current
40 Amp 40 Amp
Charge Time
Copy
>>
to USB
Enable Equalize Copy from Battery
BAT1 Charge Mode
3-Stage
Float
to go back to the previous screen.
to go back to the Home screen. Tap