Figure 12 Replacing the wiring strain relief bar
AC - G
AC - L
AC - N
Remote
30
BAT (–)
DC (+)
BAT1 (+)
BTS
BAT2 (+)
BAT3 (+)
11. Replace the wiring compartment cover.
ELECTRICAL SHOCK HAZARD
Replace the wiring compartment cover before turning on
n
power to this equipment.
Use a torque screwdriver to tighten both the captive nut
n
panel screws to 5 in-lb (0.56 N-m) torque to ensure a
required tool access to the wiring compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
Kussmaul Chief Auto Charge Battery Charger Owner's Guide
WARNING