Advanced Settings - Kussmaul Electronics Kussmaul Chief Auto Charge Guide D'utilisation

Advanced Settings

Copying This feature is important when connecting three
settings of sets of battery banks. You can just copy the
another settings of one bank and duplicate its settings to
Battery bank the others.
1. From Basic Settings tap the appropriate
battery bank (either BAT1, BAT2, or BAT3).
BAT1
LFP
Float
60 Amp
Recall
from USB
2. Tap Copy From Battery. Choose the
battery from which you want to copy
settings.
BAT2
3. Tap
Tap SAVE CHANGES save the new setting
or EXIT WITHOUT CHANGES to disregard
any new setting.
46
Basic Settings BAT1 Setup
BAT2 BAT3
Battery Type
Flooded Flooded
Charge Mode
Float 3 Stage
40 Amp 40 Amp Charge Current
Charge Time
Copy
>>
to USB
Enable Equalize Copy from Battery
Which battery would
you like to copy from?
BAT3
to go back to the previous screen.

Advanced Settings

Under Advanced Settings, you may configure charger device
settings such as display, temperature unit, CEC mode, and
resetting the unit.
Getting to
1. From any screen, tap
Advanced
screen.
Settings
2. From the Home screen, tap
Menu screen.
3. Tap Advanced Settings to enter Advanced
Settings screen.
Basic
Settings
Notifications
Kussmaul Chief Auto Charge Battery Charger Owner's Guide
to go to the Home
to go to the
Main Menu Advanced Settings
Advanced Alarm Clock
Settings
Battery
Display
Temp
Information
Energy Saving
Reset to
>>
Mode Default