Kussmaul Electronics Kussmaul Chief Auto Charge Guide D'utilisation page 58

5. Tap Minimum Absorb Time. Default value
is 1 hr.
BAT1 Max. Abs Time
3
Hours
[1 - 8]
6. Change the Minimum Absorb Time using
the + and – controls. Value ranges from 1 to
8.
7. Tap
Tap SAVE CHANGES save the new setting
or EXIT WITHOUT CHANGES to disregard
any new setting.
8. Tap
SAVE CHANGES save the new setting or
EXIT WITHOUT CHANGES to disregard any
new setting.
975-1023-01-01
BAT1 Min. Abs Time
1
Hours
[1 - 8]
Min. Abs Time
>>
to go back to the previous screen.
to go back to the Home screen. Tap
Enabling Equalization is available only for Flooded
Equalize Mode batteries. Equalization can only be started when
the charger is in Float stage.
1. From Basic Settings tap the appropriate
battery bank (either BAT1, BAT2, or BAT3).
BAT1
LFP
Float
60 Amp
Recall
from USB
2. Tap Enable Equalize. Confirm with a Yes.
Tap No, otherwise.
Battery Type
Charge Mode
Charge Current
Charge Time
Enable Equalize
3. Tap
Tap SAVE CHANGES save the new setting
or EXIT WITHOUT CHANGES to disregard
any new setting.
4. Tap
SAVE CHANGES save the new setting or
EXIT WITHOUT CHANGES to disregard any
new setting.
Basic Settings
Basic Settings BAT1 Setup
BAT2 BAT3
Battery Type
Flooded Flooded
Charge Mode
Float 3 Stage
Charge Current
40 Amp 40 Amp
Charge Time
Copy
>>
to USB
Enable Equalize Copy from Battery
BAT1 Setup
Are you sure you want
to enable equalization?
Equalization only begins after
charging enters Float stage.
Yes No
>>
Copy from Battery
to go back to the previous screen.
to go back to the Home screen. Tap
45