Power Saving Mode - Kussmaul Electronics Kussmaul Chief Auto Charge Guide D'utilisation

Basic Settings
Enabling or Power saving mode is an energy saving feature
disabling of the charger. It reduces AC input power
Power saving consumption to a minimum level after all the
mode batteries are fully charged.
1. From the Advanced Settings screen, tap
Energy Saving Mode. Tap ON to comply
with the Department of Energy efficiency
requirements. Tap OFF, otherwise.
Alarm
Display
Energy Saving
Mode
2. Tap
Tap Yes save the new setting or No to
disregard any new setting.
3. Tap
Yes save the new setting or No to disregard
any new setting.
48
Advanced Settings Energy Saving Mode
ON OFF
Clock
Battery
Temp
ON - Complies with
OFF - Does not comply with
Reset to
Department of Energy (DOE)
>> Efficiency requirements
Default
to go back to the previous screen.
to go back to the Home screen. Tap
Resetting the Resetting allows the unit to return to its factory
unit settings.
1. From the Advanced Settings screen, tap
Reset to Default.
Alarm
Display
Energy Saving
Mode
2. Tap Yes if you want all the settings to return
to factory default values. Tap No, otherwise.
Tapping No will return you to the previous
screen.
Kussmaul Chief Auto Charge Battery Charger Owner's Guide
Advanced Settings
Are you sure you would
Clock
like to reset to default?
Battery
Temp
Yes No
Reset to
>>
Default