tecnotest STARGAS Manuel D'utilisation page 7

_______________________________________________________________________________________ STARGAS
Dear garage owner,
Thank you for having chosen one of our instruments for your workshop.
We are certain that it will give the utmost satisfaction and be a notable help
on the job.
Please become fully familiar with the instructions in this user's manual.
It should be kept ready to hand for consultation whenever required.
The STARGAS analyser ranks at the top of the last generation of gasoline
engine exhaust gas analysers and allows to provide the repairer with a
reliable guide to the analysis procedure through the indications supplied by
the colour LCD.
STARGAS adds to the gas analyser functions - the analysis of
HC O NO
, , x (optional), of Lambda coefficient, of engine revolutions (RPM)
2
and of temperature - the Lambda probe operation and the relative
probe-central unit system control. It also carries out the functions of a
autodiagnosis tester (option), Oscilloscope/Volt-ammeter (option) and of
controlling unit for smokemeter (option).
The analyser is nowadays absolutely necessary for a good engine tuning,
and for the diagnosis of possible operation drawbacks aimed at limiting the
vehicle polluting emissions.
If the emission values are not correctly adjusted it will be absolutely
impossible to obtain a good operation of engines, especially of electronic
injection fuel ones.
Moreover, as to vehicles equipped with catalytic muffle and Lambda probe it
is important to have the possibility of detecting the oxygen content (O
the Lambda coefficient value too.
OPERATING INSTRUCTIONS
CO CO
, ,
2
) and
2
3