tecnotest STARGAS Manuel D'utilisation page 19

STARGAS __________________________________________________________________________ CONNECTION
•
Attach the battery supply cable (77) to the battery socket (54) and to
the tested vehicle battery (in case the vehicle is not already supplied by
the mains cable).
•
Attach the mains cable (81) to the mains socket (56) and to the supply
source of the power mains (in case the vehicle is not already supplied by
battery cable).
•
For the connection to the feeding mains, make sure that the tap has the
same VOLTAGE/FREQUENCE features as those that are written on the
plate which
The earthing is absolutely necessary.
ATTENTION:
The oxygen sensor (47) is one of chemical kind and it has to be
replaced when it is no longer possible to obtain the automatic
span. To replace the exhausted sensor it is necessary to ask for
the intervention of the authorised technical service. Not to alter
the test results, let the gas outlet flow coupler free (48).
OPERATING INSTRUCTIONS
is located on the analyser back side.
15