Simulation - tecnotest STARGAS Manuel D'utilisation

LAMBDA PROBE TEST ____________________________________________________________________ STARGAS
After 10 seconds the whole graph is displayed.
In the lower box a bar indicates the probe conditions starting from the
FAULTY state and stopping in the point that corresponds to that state.
The area between the FAULTY area and the EFFICIENT area is
considered a MEDIUM EFFICIENCY AREA .
•
Press MENU to display FUNCTIONS BAR whose icons have the same
functions as those previously described (see chapter 6.0).
9.2 -

Simulation

Through this test the analyser simulates the Lambda probe operation by
replacing it.
Each test lasts maximum 60 seconds to guarantee that the ECU-catalytic
converter system of the tested vehicle is not damaged.
Thanks to the simulation the analyser allows to check the operation of the
central unit and of the relative wirings in the connection with the
Lambda probe.
NOTA BENE:
Improper use of the analyser can cause damages, so please comply with the
instruction.
42 OPERATING INSTRUCTIONS