Printer Paper Change; Filter Cleaning - tecnotest STARGAS Manuel D'utilisation

MAINTENANCE _________________________________________________________________________ STARGAS
12.7 -

Printer paper change

Open the printer front panel ( 21 ) and go ahead with the replacement only
when the analyser is on.
•
Remove the exhausted roll.
•
Fit the new roller edge ( 72 ) into the printing mechanism moth, after
opening the mechanism the paper is fed automatically.
•
Introduce the paper roll in its housing and close the panel.
The printer writes on thermal paper. The spare rollers can be ordered
directly at our resellers. The use of original paper is recommended.
12.8 -

Filter cleaning

The filter allows the analyser to work in dusty places without having
operating problems over time.
A periodical cleaning with water and soap is suggested. In case the filter is
still dirty after cleaning, replace it.
To dismount the filter:
•
Remove the filter support ( 26 ) on the back of the tool containing he filter
( 68 ).
•
Clean or replace the filter as needed.
•
Replace the filter inside the filter holder and then fit the assembly inside
the housing by pressing it by the hand.
54 OPERATING INSTRUCTIONS