How To Use The Remote Control; Use Of The Memory Card - tecnotest STARGAS Manuel D'utilisation

USE ___________________________________________________________________________________ STARGAS
•
Press the right and left cursor keys to scroll the cursor along letters or
digits or to set a space, after positioning the cursor on the last character
(letter or digit) of the message.
•
Press MENU and at the same time the arrow up or down cursor
keys (many times) to select the space setting that erases the selected
character.
•
Press ENTER to toggle between fields or to go to the following selection.
3.5 -

How to use the remote control

The Infrared remote control (61) enables the operator to conduct the main
tests without using the buttons of the STARGAS.
To correctly use the remote control, point it towards the front of the
STARGAS from a distance of not more than 10 meters.
If the remote control effectiveness diminishes remarkably with reference to
the distance, it is necessary to replace the cells, located in the special
housing.
NOTA BENE:
To favour the correct operation of the remote control inside the vehicle, for
some types of cars using shielded windows it is necessary to slightly lower
the window on the aiming side.
3.6 -

Use of the memory card

The memory card has to be introduced and removed from the reading
slot (12) of the STARGAS when the tool is off or in the stand-by mode.
20 OPERATING INSTRUCTIONS