Ametek Sorensen XDL II Série Mode D'emploi page 9

ALARM OUTPUT
Isolated rear-panel open-collector output signal. User can select output to be activated for either
OVP, OCP, Overtemperature or Sense miswiring, or for any of those four faults.
DIGITAL INTERFACES (P models only)
Full digital remote control facilities are available through the RS232, USB, LAN and GPIB interfaces.
General
RS232:
GPIB:
USB:
LAN:
Remote Command
Processing Time:
Status Indication:
Main Outputs
Voltage Setting:
Current Setting:
Readback V & I
Auxiliary Output (T models only)
Voltage Setting:
Current Setting:
Readback V & I
GENERAL
AC Input:
Power Consumption:
Operating Range:
Storage Range:
Environmental:
Cooling:
Store/Recall:
Safety:
EMC:
Size:
Weight:
8
Standard 9-pin D-connector. Variable Baud rate (600 to 19200).
Conforming with IEEE488.1 and IEEE488.2
Standard USB 2.0 hardware connection. Operates as a virtual COM port.
Ethernet 100/10base-T hardware connection. Auto speed detect, auto
MDIX. LXI V1.2, Class C compliant.
Typically <25ms between receiving the command terminator for a step
voltage change at the instrument and the output voltage beginning to
change.
Remote mode and LAN status indicators
16-bit; Resolution 1mV, accuracy ± (0·03% +5mV)
16-bit; Resolution 0.1mA, accuracy ± (0·2% + 5mA)
Resolution 0.01mA, Accuracy ± (0·2% + 0·5mA) on 500mA range.
See meter specifications.
Resolution 10mV, accuracy ± 0.5% ±10mV
Resolution 10mA, accuracy ± 0.5% ±10mA
See meter specifications
230V AC or 115V AC ± 10%, 50/60Hz
Installation Category II
Single output: 250VA max; Triple output: 500VA max.
+5ºC to +40ºC, 20% to 80% RH
−40ºC to + 70ºC
Indoor use at altitudes up to 2000m, Pollution Degree 2.
Intelligent variable-speed fan. Over-temperature trip shuts down
output if internal temperatures exceed predetermined thresholds.
Up to 50 set-ups each main output, 50 linked set-ups, and 10 auxiliary
output settings can be saved and recalled via the keyboard or remote
interfaces.
Complies with EN61010−1
Complies with EN61326
Single output: 140 x 160 x 290mm (WxHxD), excl. feet & terminals.
Triple output: 280 x 160 x 290mm (WxHxD), excl. feet & terminals
Single: 5.5kg; Triple: 10·5kg