Controls And Instruments; Key Ignition Switch - EMAK 102 Manuel D'utilisation

4. CONTROLS AND INSTRUMENTS

c
a b
4.2
4.10
4.3
4.1
4.4
4.8
B
4.1 STEERING WHEEL
Turns the front wheels.
4.2 CHOKE CONTROL (if fitted)
This enriches the mixture so must only be used for the time nec-
essary when starting from cold.
d
e
f
4.6
4.11
B
A
4.11
4.12
A
A
B
4.3 ACCELERATOR LEVER
Regulates the engine's r.p.m. The positions are indicated on a
plate showing the following symbols:
«CHOKE»
«SLOW»
4.7
«FAST»
– The «CHOKE» position (if fitted instead of the 4.2 control)
enriches the mixture so must only be used for the time neces-
sary when starting from cold.
– When moving from one area to another, put the lever in a
position between «SLOW» and «FAST».
– When cutting, go to the «FAST» position.

4.4 KEY IGNITION SWITCH

4.5
This key operated control has three positions:
«OFF»
«ON»
«START»
(if fitted) for starting from cold
for minimum engine speed
for maximum engine speed
everything is switched off;
activates all parts;
engages the starter motor.
EN 13