EMAK 102 Manuel D'utilisation page 95

3.7 REMOVAL OF THE STOP FROM THE HOOKING PAWL
OF THE GRASS-CATCHER
For transport purposes,
the pawl (1) hooking the
grass-catcher is held
onto the rear plate by a
stop (2).
This stop must be
removed before fitting
the grass-catcher brack-
ets, and is not to be sub-
sequently used.
3.8 MOUNTING THE FRONT BUMPER
(if provided)
Mount the front bumper
(1) on the bottom of the
frame (2) using the four
screws (3).
EN 12
1
2
2
1 3