Unpacking And Assembly - EMAK 102 Manuel D'utilisation

3. UNPACKING AND ASSEMBLY

For storage and transport purposes, some components of the
machine are not installed in the factory and have to be assem-
bled after unpacking. Follow the instructions below.
IMPORTANT
The machine is supplied without engine
oil or fuel. Before starting the engine, fill with oil and fuel fol-
lowing the instructions given in the engine manual.
WARNING!
Unpacking and completing the
assembly should be done on a flat and stable surface,
with enough space for machine handling and its packag-
ing, always making use of suitable equipment.
3.1 UNPACKING
When unpacking the machine, take care to gather all individual
parts and fittings, and do not damage the cutting deck when tak-
ing the machine off the pallet.
The packing contents:
– the machine;
– the steering wheel;
– the seat;
– the front bumper (if provided);
– the battery
– the grass-catcher components;
– an envelope containing:
– the operator's manuals and documents,
– the nuts and bolts,
– 2 starter keys and a spare 10 A fuse.
NOTE
To prevent damage to the cutting deck,
raise it to its maximum height and take utmost care when tak-
ing the machine off the pallet.
To make it easier to move or take the machine off the pallet,
put the transmission disengagement lever in position «B»
( 4.33).
Disposal of the packaging should be done in accordance with
the local regulations in force.
3.2 FITTING THE
STEERING WHEEL
Put the machine on a flat
surface and straighten up
the front wheels.
Use a screwdriver to
remove the central cover
(1a) of the steering wheel.
Fit the steering wheel (1)
onto the protruding shaft
1
1a
EN 9