EMAK 102 Manuel D'utilisation page 117

IMPORTANT
A blown fuse must always be replaced by
one of the same type and ampere rating, and never with one
of another rating.
If problems persist, contact Your Dealer.
6.3.7 Dismantling, replacing and remounting the blades
WARNING!
Always wear work gloves when
handling the blades.
WARNING!
Damaged or bent blades must always
be replaced; never try to repair them! ALWAYS USE
ORIGINAL BLADES BEARING THE SYMBOL
Only blades with the following codes must be used on this
machine:
Mod.102:
82004341/1 - 82004340/1
82004348/0 - 82004347/0
Mod.122:
82004350/0 - 82004349/0
82004343/0 - 82004342/0
IMPORTANT
Both of the blades should be replaced
together, especially when there are slight differences in wear.
EN 34
!