EMAK 102 Manuel D'utilisation page 99

a) Operating functions
NOTE
According to the type of machine engine,
some of the following functions may not be available.
1
certain number of hours. This is indicated by the display, which
opens the "Hour counter" function and flashes for approx. 2 min-
utes, regardless of what functions are running.
2
3
EN 16
1. Hour counter. Indicates the
total number of engine running
hours.
NOTE
The ma-
chine needs servicing after a
2. Voltmeter. Indicates the bat-
tery charge level.
3. Speed indicator. Indicates
the engine's rotation speed with
a series of asterisks, i.e.
engine at minimum speed
travelling speed
cutting speed
NOTE
The flashing light indicates that the engi-
ne's rotation speed is not suitable for cutting grass.
4
You can change the time with the key turned to «ON» and the
engine off, by following the steps below:
– press the «MODE» button several times to bring up the clock
icon;
– press the «MODE» button until the first two digits flash (hour);
– press one of the side buttons (a – b) to increase or decrease
by a unit;
– press the «MODE» button until the other two digits flash (min-
utes);
– press one of the side buttons to increase or decrease by a
unit;
– press «MODE» to complete your setting.
NOTE
The clock has a buffer battery. When it
runs out, contact an Authorized Service Centre.
b) Auxiliary functions
5. Grass-catcher full light. Together with the inter-
mittent sound warning, it indicates that the grass-
catcher is full.
5
4. 24-hour clock (if fitted)
a
b