Description Of Device / Spare Parts; Proper Use; Residual Risks - ATIKA BSV 315 Notice Originale

Please refer to the attached assembly
and operating instruction sheet for refe-
rences to figure numbers in the text.
...

Description of device / spare parts

1
Pos. Designation
no.
Adjusting wheel for clamping of saw
1
band
2 Upper case door
3 Pushing stick holder
4 Pushing stick
5 Circuit closer/breaker
6 Lower saw band coping
7 Lower case door
8 Base frame
9 Belt gear
10 Lower band saw roll
11 Crank for adjusting of belt tension
12 Table insert
13 Saw table
14 Parallel stopper
15 Saw band
16 Upper band guidance
17 Upper band saw roll
18 Adjusting wheel for saw band coping
19 Upper saw band coping
20 Transverse adjustment saw table
21 Splinters suction socket
22 Base
23 Line cord
24 Motor
25 Adjusting wheel for upper band saw roll
26 Stopper guidance profile

Proper use

The device is suitable for cutting wood, wood like materials
and plastics.
Round materials (logs, pipes, etc.) are not permitted to be
cut without a special device for this purpose.
When endwise sawing plain work pieces a suitable stop
angle must be used for a safe guidance.
Only materials that can be safely placed are allowed to be
cut.
Order The intended usage also includes compliance with the
number operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
362665
in the instructions.
Follow the relevant accident prevention rules for operation
and other generally recognised health and safety at work
rules.
Any other use is deemed not to be use as prescribed. The
362872
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
362658
Unauthorised modifications on the device exclude a liability
of the manufacturer for damages of any kind resulting from
it.
Only persons who are familiarised with the device and
informed about possible risks are allowed to prepare, ope-
rate and service this device. Repair works may only be car-
ried out by us or by a customer service agent nominated by
us.
362673
This machine must not be used in an explosive environ-
ment or exposed to rain.
362697
Metallic parts (wires etc.) have unconditionally to be re-
moved from the material to be cut.
362698

Residual risks

362662
Even if used properly, residual risks can exist even if the rele-
vant safety regulations are complied with due to the design
362672
determined by the intended purpose.
Residual risks can be minimised if the "Safety advices" and the
362665
"Intended usage" as well as the whole of the operating instruc-
tions are observed.
Observing these instructions, and taking proper care, will re-
duce the risk of personal injury or damage to the equipment.
Risk of injury to fingers and hands by the tool (saw band)
or work piece, e.g. during saw band replacement.
Injury by catapulted workpiece parts.
Throwback of the workpiece or workpiece parts.
Breakage and expulsion of saw band.
Risk from electricity when using improper electrical connec-
362699
tions.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Emission of harmful wood dust when working without
shavings exhaustor.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
14