Flash Bracketing Flash Bracketing - Leica SF 64 Mode D'emploi

FLASH BRACKETING
FLASH BRACKETING
Flash bracketing can be used in the
modes. It comprises three successive shots with
different flash exposure compensations.
The possible exposure compensations range from -3
to 3 apertures in third aperture stages/EV ratings.
Setting procedure:
1. Press the button repeatedly until the
13
selection menu appears
2. Press the sensor button on the touch
MENU
menu
3. Use ▲ / ▼ to move
FLASH BRACKETING
central field outlined in red
4. Press
FLASH BRACKETING
5. Use / to move the desired exposure
▲ ▼
compensation
to the central field outlined in red
6. Press desired exposure compensation
The selected setting is accepted immediately.
• and the exposure compensation are shown
FB
in the display.
and flash
TTL A
to the
The first shot is taken without exposure compensa-
tion, the second with negative compensation and the
third with positive compensation.
• In the display, is shown for the first shot,
FBI
and the negative compensation for the second and
and the positive compensation for the third.
FBIII
Flash bracketing is automatically deleted after the
third shot.
• goes out in the display.
FB
Note:
The exposure compensation is always displayed as
positive when flash bracketing is being set!
Flash bracketing in flash mode
TTL
Flash bracketing in the flash mode can only work
TTL
if the camera supports manually setting a compensa-
tion value on the flash unit (see camera manual)!
Otherwise, the shots are taken without exposure com-
pensation!
Flash bracketing in automatic flash mode
The camera type is not important for flash bracketing
in automatic flash mode .
A
EN
FBII
A
79