Designation Of Parts; Camera Type-Specific Flash Functions - Leica SF 64 Mode D'emploi

DESIGNATION OF PARTS

EN
View from the front
AF Auxiliary Light
1
Photo Sensor
2
Main Reflector
3
4 Sub Reflector
5 Shoe with
Knurled Nut
fa
Locking Pin
b
View from the right
6 Reflector Head, with
Lens Release Button
a
Reflector Card
b
Wide Angle Diffusion Head
c
7 Battery Compartment Cover
Battery Compartment Cover open
Mini US
B Socket for Firmware Updates
8
Battery Chambers
9
View from the Left
10 Synchronization Socket with Thread (cover removed)
Socket for External Power Supply, with
11
Spring-Loaded Sliding Cover
a
View from the rear
12 Release Button/Flash Readiness Display
Function Button/Correct Exposure Display
13
Angle Scale for Tilt of the Reflector Head
14
Monitor
15
16 Main Switch
17 Sensor for Wireless Operation (behind infrared-permeable casing shell)
52

CAMERA TYPE-SPECIFIC FLASH FUNCTIONS

The flash functions listed below are available with the camera systems stated in
each case.
• Flash readiness display in the camera viewfinder/camera monitor
• Automatic flash synchronization time control
• Automatic fill-in flash
• TTL flash mode
• Flash exposure compensation with
• Synchronization to the start or end of the exposure time (setting on the
camera)
• Automatic FP high-speed synchronization with
• Automatic motor zoom control
• Extended zoom mood
• AF assist light
• Automatic flash range display
• Automatic programmed flash
• Preflash function to reduce the red-eye effect
• Off-camera flash operation
• Spot zoom mood
• Wake-up function for the flash unit
TTL
TTL