Dismounting The Ceiling Hoist; Dismounting Robin - Invacare Robin Manuel De Maintenance

2. Insert the wheels of the hoist into the rail.
The direction the hoist faces does not matter during
installation.
1586747-A
3. Install the end stop.
Tighten the bolt to 30 Nm.
4. If too much resistance is experienced when the hoist is pulled,
or the hoist moves too freely and unintentionally, adjust the
friction brake.
5. Connect the hand control.
6. Adjust the length of the emergency stop/lowering cord to within
the user's reach.

3.2 Dismounting the ceiling hoist

3.2.1 Dismounting Robin™

Remove the ceiling hoist from the trolley
Service
9